Products

To view more specific details about our parts, please go to the catalog page.

RAIL TIE

This tie fits inside the top of the post and secures to the rails. This keeps the rail from moving (18 ga. material).

GROUND SLEEVES

Used for easy removal of fence sections as needed. this will allow access to yards. The sleeves should be cemented into the ground (16 ga. material, 24″ long).

GATE POST INSERT

For 4″ & 5″ vinyl. 14 ga. is standard and holds most gates up to 48″ wide. 12 ga. available upon request.

3 SIDED GATE POST INSERT

For 4″ & 5″ vinyl. Used for gates 60″ and wider (14 ga. is standard). 12 ga. available upon request.

HEAVY DUTY POST INSERT

Good for high wind areas where the need for superior rigidity is required.

ECONOMY Z POST INSERT

An economical way to strengthen line posts.

RAIL STIFFENER

Rails made for most 1 1/2″, 1 3/4″, and 2″ Profiles (18 ga. Counteracts “wavy” effect on dark colored fencing. 20 ga. for all other vinyl)

RAIL STIFFENERS

Provided added strength and rigidity too rails. Great for railing and picket fences. Any size, any shape, CMsteel can make it!

PICKETS

Any size, any shape, CMsteel can make it!

UNIVERSAL CORNER/LINE TOWER

Used for anchoring post to concrete or wood decks. This tower comes in 24″, 36″, and 48″ standard lengths (14 ga. with a 1/4″ base). Custom lengths available upon request.

LINE TOWER

Used for anchoring line post to concrete or wood decks. This tower comes in 24″, 36″, and 48″ standard lengths (14 ga. with a 3/8″ base). Custom lengths available upon request.

THREE SIDED TOWER

Used where extra strength is required. this tower comes in 24″, 36″, and 48″ standard lengths (14 ga. with a 1/4″ base). Custom lengths available upon request.

UNIVERSAL LINE/CORNER TOWER WITH PIPE BASE

Pipe Post to drill hole in concrete and glue in place. this tower comes in 24″, 36″, and 48″ standard lengths (14 ga. with a pipe base).

SIDE RAIL MOUNT

For extra deck space (Attaches to outside of deck).

C-CHANNELS

(GAZEBO & PERGOLA PARTS)

Spans up to 192″, two 96″ sections joined by one 48″ C-splice section. Fits Hollow Rail 2″ X 6″ or 2″ X 8″ (No Welding Required). You can add extra 48″ and 96″ sections to fit larger spans. 16 ga. used for headers and 20 ga. for cross members.

2 X 6 C-BRACKET

Goes into the end of a rail so that it can be secured to a wall or pillar.

HEADER BRACKET

This bracket works in conjunction with C-Channel R141 for mounting channels to a wall in awning applications.

POST TOWERS

(VERTICAL CORNERS & LINES)

Used for corner or end.

Used for corner or end.

Used for line towers.